Audifans.net: Audi Forums
|
Search found 309 matches |
Author | Message |
---|---|
![]() |
|
daz-the-dogg Replies: 0 Views: 7089 |
![]() |
Hi, I'm new in the A6 side but have been a member of Audifans for quite some time as having owned a few 80's over the years!
Ok problem I have is I have a 2008 A6 Avant 2.0Tdi Ltd Edition with the 7 ... |
|
![]() |
|
daz-the-dogg Replies: 8 Views: 16492 |
![]() |
Looks to me as if somebody has fitted after market side indicator repeaters from a motor factors, if you look at your new wing you will see that the hole has been rough shaped where as from the factor ... | |
![]() |
|
daz-the-dogg Replies: 11 Views: 34552 |
![]() |
Ok, its hard to try and diagnose over the computer, where abouts in the country are you? | |
![]() |
|
daz-the-dogg Replies: 11 Views: 34552 |
![]() |
I believe the shut off solenoid needs to be powered and fitted for the car to run, easy way to test it is with the use of a 2nd person get them to turn the ignition on and listen for a click from it, ... | |
![]() |
|
daz-the-dogg Replies: 11 Views: 34552 |
![]() |
Hi mate, had a similar problem on a 1994 80 1.9tdi, and found that there was a break in the wire to the fuel stop solenoid from the ecu, not sure if your model has the same type of fuel stop solenoid ... | |
![]() |
|
daz-the-dogg Replies: 4 Views: 13943 |
![]() |
9 out of 10 times you should be Ok, check it the way I've said, make sure you give the head a good clean down and when you strip the valves, as I take it your going to re-grind them whilst the heads o ... | |
![]() |
|
daz-the-dogg Replies: 2 Views: 6500 |
![]() |
If you are worried get yourself a steel set square and a steel rule and you should be able to check the head for any high spots by placing the rule or set square on its edge on the mating surface and ... | |
![]() |
|
daz-the-dogg Replies: 4 Views: 13943 |
![]() |
If you are worried get yourself a steel set square and a steel rule and you should be able to check the head for any high spots by placing the rule or set square on its edge on the mating surface and ... | |
![]() |
|
daz-the-dogg Replies: 2 Views: 6500 |
![]() |
What was the reason for pulling the head off Andrew? If it was just to check and make sure all the valves and pistons were Ok you should be Ok just bolting it back on with a new gasket and tightening ... | |
![]() |
|
daz-the-dogg Replies: 4 Views: 13943 |
![]() |
What was the reason for pulling the head off Andrew? If it was just to check and make sure all the valves and pistons were Ok you should be Ok just bolting it back on with a new gasket and tightening ... | |
![]() |
|
daz-the-dogg Replies: 6 Views: 18821 |
![]() |
Might be worth giving these guys a try http://exhaustpartsuk.com/index.php?main_page=index&cPath=74 | |
![]() |
|
daz-the-dogg Replies: 1 Views: 7985 |
![]() |
Try your local motor factors, most sell it by the metre | |
![]() |
|
daz-the-dogg Replies: 2 Views: 12570 |
![]() |
http://wiki.ross-tech.com/wiki/index.php/16471/P0087/000135 | |
![]() |
|
daz-the-dogg Replies: 2 Views: 11230 |
![]() |
ross tech wiki http://wiki.ross-tech.com/wiki/index.php/18227/P1819 and http://wiki.ross-tech.com/wiki/index.php/18228/P1820 | |
![]() |
|
daz-the-dogg Replies: 4 Views: 14044 |
![]() |
Ok thanks for that Mike.
From what I've read no the rears arent adjustable on the 2wd's just the 4wd's, just the front camber and toe, reason I'm asking is that I'm in the process of rebuilding the ... |
|
![]() |
|
daz-the-dogg Replies: 4 Views: 14044 |
![]() |
Mike would the alignment specs for the S2 Avant that you have on your site be roughly right for the 80 1.9tdi Avant? | |
![]() |
|
daz-the-dogg Replies: 4 Views: 10749 |
![]() |
http://shop.autewo.de/Elektrik---Schalter---Steuergeraete-Schalter---Bedienelemente-Audi-80-90-Typ-81-85-Lenkstockschalter-Blinker-/a40121359_u341_z62ec4508-2d7c-4247-9b64-5355b50d4730/ | |
![]() |
|
daz-the-dogg Replies: 4 Views: 10749 |
![]() |
Ken try here http://shop.autewo.de/Elektrik---Schalter---Steuergeraete-Schalter---Bedienelemente-Audi-80-90-Coupe-Typ-81-85-Urquattro-Lenkstockschalter-Licht-negro-321953513-/a44291838_u341_z62ec4508- ... | |
![]() |
|
daz-the-dogg Replies: 8 Views: 28395 |
![]() |
a few listed here mate http://www.ebay.co.uk/sch/i.html?_odkw=audi+a6+injector&_osacat=0&_trksid=p2045573.m570.l1313.TR0.TRC0.Xaudi+a6+2.5+injector&_nkw=audi+a6+2.5+injector&_sacat=0&a ... | |
![]() |
|
daz-the-dogg Replies: 3 Views: 12889 |
![]() |
have a look here for the other http://forums.audiworld.com/archive/index.php/t-1845287.html | |
![]() |
|
daz-the-dogg Replies: 3 Views: 12889 |
![]() |
Chris click link and itll give you the fault code and what it is http://wiki.ross-tech.com/wiki/index.php/00003 the other number you list isnt listed on ross tech wiki | |
![]() |
|
daz-the-dogg Replies: 7 Views: 13368 |
![]() |
Merton I use this company http://www.jandrcvjoints.co.uk/ | |
![]() |
|
daz-the-dogg Replies: 20 Views: 44533 |
![]() |
Ok mate, least your mobile, they've done as I would have but missed out the switch, which would save taking the fuse out | |
![]() |
|
daz-the-dogg Replies: 20 Views: 44533 |
![]() |
Gary, be aware though this isn't a permanent fix but will get you mobile until either you or Audi can sort the problem, as long as you use wire that is rated to 20 amps and above a switch rated the sa ... | |
![]() |
|
daz-the-dogg Replies: 20 Views: 44533 |
![]() |
If you can find a suitably rated fuse that is turned on and off by the ignition no, the other way is to run a wire from the battery to the fuse with a flick switch, make sure you run an inline fuse be ... | |
![]() |
|
daz-the-dogg Replies: 20 Views: 44533 |
![]() |
Gary run a permanent link wire across the fuses, you'll probably find that the feed wire to the fuse has now completely broken | |
![]() |
|
daz-the-dogg Replies: 5 Views: 24863 |
![]() |
or here http://www.ebay.co.uk/itm/AUDI-80-TDI-ESTATE-1994-1-9-GEARBOX-MANUAL-WWO-012301-211L-/181200268610?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Car+Make%3AAudi%7CModel%3A80&hash=item2a306 ... | |
![]() |
|
daz-the-dogg Replies: 5 Views: 24863 |
![]() |
try here http://www.ebay.co.uk/itm/AUDI-80-1-9-TDI-DIESEL-5-SPEED-GEARBOX-1991-1996-ESTATE-SALOON-/221275379339?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Car+Make%3AAudi%7CModel%3A80&hash=item ... | |
![]() |
|
daz-the-dogg Replies: 20 Views: 44533 |
![]() |
That's unbelievable, I fix cars, bikes and scooters for people who cant afford dealer prices or who have got p'eed off with the false diagnosis that they've been given, a friend of mine owns a local b ... | |
![]() |
|
daz-the-dogg Replies: 20 Views: 44533 |
![]() |
I know what you mean, they only employ fitters these days who look at a pc screen, and if it tells them the fault is that then that's what they believe. If the fault persists after it comes back could ... | |
All times are GMT |