Audifans.net: Audi Forums
|
Search found 56 matches |
Author | Message |
---|---|
![]() |
|
cadiddy Replies: 24 Views: 54823 |
![]() |
I sorted mine by ditching the expensive hydraulic assist unit and fitting a vacuum servo and PAS pump off a 1.9 80, super easy to do and I've had no problems since (did this in june) I dont however kn ... | |
![]() |
|
cadiddy Replies: 3 Views: 10260 |
![]() |
Okay chaps thanks for that will get that done and see what we get ![]() |
|
![]() |
|
cadiddy Replies: 3 Views: 10260 |
![]() |
Hi chaps, my mums a4 has developed a fault where when under load, like drving uphill or medium to hard accleration, it will loose power also randomly does it when not under load and driving on flat ro ... | |
![]() |
|
cadiddy Replies: 0 Views: 5477 |
![]() |
Hi all, My mum is looking at a 51 plate allroad with the v6 diseasal manual, and basically all im trying to find out is what they're generally like as regards fuel consumption, running cost known faul ... | |
![]() |
|
cadiddy Replies: 2 Views: 5116 |
![]() |
I followed a guide on the s2 forum by jas11n and he used 1.2w bulbs IIRC, so thats what i went and did, and all the ones i replaced like that work absolutly fine, its just the abs button which is dull ... | |
![]() |
|
cadiddy Replies: 2 Views: 5116 |
![]() |
Right so have recently rebulbed my dashlights all apart from the abs button on the dash which is LED, Did these ever come with filament bulbs or was it always LED? Its a little annoying as all my dash ... | |
![]() |
|
cadiddy Replies: 1 Views: 5588 |
![]() |
This shouldnt cause the gearbox to whine as its only like what you would do if you bump started the car.
Does the whine go away when you press the clutch? Is it worse when in gear and driving? How ... |
|
![]() |
|
cadiddy Replies: 10 Views: 36538 |
![]() |
Hi Daz, yes i will be doing the fluid change myself, i have a manual for it at home and was assuming that the correct procedure would be detailed in there, however i will cross reference with the guid ... | |
![]() |
|
cadiddy Replies: 10 Views: 36538 |
![]() |
Well obviously it's very hard not to give it a bootful every chance you get, it's hard to say for sure what the auto box is like as its currently a lumpy so gunna do a fluid and filter change and then ... | |
![]() |
|
cadiddy Replies: 10 Views: 36538 |
![]() |
Right, it's been a while since I've updated this thread so I'll start by saying the car is now mot'd taxed and a lot of fun ![]() The Mot was bit of a pain with it failing on lack of servo assist. This ... |
|
![]() |
|
cadiddy Replies: 24 Views: 54823 |
![]() |
No vac pump on the 1z that I know of, although I could be wrong, times like this a manual would come in handy ![]() |
|
![]() |
|
cadiddy Replies: 24 Views: 54823 |
![]() |
Well after getting prices and weighing up options I have started installing a vacuum servo into my coupe. It's all bolted up and am just trying to work out where the larger black hose should go. Any t ... | |
![]() |
|
cadiddy Replies: 24 Views: 54823 |
![]() |
90psi? That's only 6 bar? Seems very low for a 140 bar system? | |
![]() |
|
cadiddy Replies: 24 Views: 54823 |
![]() |
Hi Scotty, not yet checked the switch but will do tomorrow, I found that the working pressure is 140 bar so can hopefully Work out what the nitrogen pressure should be.
Thanks for your help guys I'll ... |
|
![]() |
|
cadiddy Replies: 5 Views: 12719 |
![]() |
Your whistle I'm sure is coming from the large rubber hose that comes from the intercooler to the turbo, it's the rubber section about 4 inches long immediately to the left of the cam cover, these are ... | |
![]() |
|
cadiddy Replies: 24 Views: 54823 |
![]() |
Right so after doing the tests described on 20v.org I'm pretty sure it's the bomb not the servo, however I'm still not getting any warning lights on the dash, I took the instrument cluster out and cou ... | |
![]() |
|
cadiddy Replies: 24 Views: 54823 |
![]() |
I was kinda hoping it wouldn't be but did expect it to be honest.
Thanks for your help Cadan |
|
![]() |
|
cadiddy Replies: 24 Views: 54823 |
![]() |
Cheers Scotty, so where should I look first? Accumulator or servo test? I'm not getting any warnings at all but I'm almost certain the bomb needs replacing ![]() |
|
![]() |
|
cadiddy Replies: 24 Views: 54823 |
![]() |
Hi all, put my 20v coupe in for MOT yesterday and all was fine apart from there was no vacuum build up is too slow and no servo assist, how can I diagnose and fix this and could it be something I have ... | |
![]() |
|
cadiddy Replies: 2 Views: 16544 |
![]() |
Best of luck with the project mate, she looks stunning in the 2nd photo ![]() Cheers |
|
![]() |
|
cadiddy Replies: 10 Views: 36538 |
![]() |
So, about time for bit of an update, been real busy the last month so not too much has been done.
I have managed to find the leak, corrosion along the top of the screen is pushing the seal off the bo ... |
|
![]() |
|
cadiddy Replies: 10 Views: 36538 |
![]() |
Yeah I did, couldn't resist really ![]() |
|
![]() |
|
cadiddy Replies: 2 Views: 5264 |
![]() |
I've done a bit of reading and I think it's controlled by its own ecu, which I think is located under the steering wheel, there is a possibility that I've knocked something under there at point yester ... | |
![]() |
|
cadiddy Replies: 2 Views: 5264 |
![]() |
Okay, so today I had the negative lead off on my auto coupe whilst doing works on it and when I reconnected it and went to drive around the block it pulled away fine then I stopped 10 meters later as ... | |
![]() |
|
cadiddy Replies: 10 Views: 36538 |
![]() |
So the story begins a few weeks back when I went with a mate on scrappy run for parts for his chavmobile. Now, as soon as we get there my beady eye spots a B3 coupe, so I make a beeline for instead of ... | |
![]() |
|
cadiddy Replies: 4 Views: 5310 |
![]() |
True, think that ideas gone out the window, and tbh after hearing the 5 cylinder has hard to buy it straight away.
Will weigh up my options and see where i get. Thanks for your help Mike. Cheers |
|
![]() |
|
cadiddy Replies: 4 Views: 5310 |
![]() |
So between 5 and 6 hundred sound a bit better? What kinda job of it to shove a manual box in?
Cheers |
|
![]() |
|
cadiddy Replies: 4 Views: 5310 |
![]() |
So I hae the oppertunity to buy a B3 20v coupe with 111k on the clock all runs as it should, everything works, cosmetically could do with a tidy up but no corrosion is rearing its ugly head anywhere. ... | |
![]() |
|
cadiddy Replies: 2 Views: 6954 |
![]() |
its looking like it could be the flaps then as i can get water out both ways for the matrix. | |
![]() |
|
cadiddy Replies: 2 Views: 6954 |
![]() |
Right chaps, a month or two ago my brother bought an 80 avant TDi, got it for a song but it does have a few little issues im hoping someone can help me with.
First of all the heaters arent really ge ... |
|
All times are GMT |