Insurance quotes through Adrian Flux
Audifans.net: Audi Forums

www.audifans.net :: View topic - How to maintain aluminum alloy doors and windows
 
 Forum FAQForum FAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
View next topic
View previous topic
Post new topic   Reply to topic
Author Message
qizhen0809
Audi Nut



Joined: Jun 28, 2016
Posts: 72

PostPosted: Fri Apr 16, 2021 10:05 am Reply with quote Back to top

sliding glass patio doors with blinds
corner bifold doors cost uk
what are the best bi folding doors
black sliding patio doors canada


Do you need to know about our expertise in improving the maintenance and management of aluminum alloy doors and windows? Good quality aluminum alloy doors and windows companies can use them more assuredly, and well-maintained aluminum alloy doors and windows can make students use them for a longer time. Today, I will introduce to you the magic formula for maintenance:

1. Push and pull naturally

When using aluminum alloy doors and windows, the movements should be handled gently, and the push and pull should be natural. If you find it is difficult, do not push hard. You should troubleshoot first..

2. Remove dust accumulation

Dirt and deformation of aluminum alloy doors and windows are the main reasons why it is difficult to pull its quality. Keep the door clean, especially the sliding groove. Usable fouling vacuum cleaner tank top and door seal. When cleaning aluminum alloy doors and windows, people do not step on the aluminum frame or pull the support of the frame.

3. Remove stagnant water

After use in rainy days, wipe dry the wet glass and aluminum alloy door and window frames in time. Pay special attention to the water accumulation in the chute to prevent water stains from accumulating large amounts of residue. If the chute is used for a long time, the friction force will increase. You can add a little impact oil or apply a layer of fire wax oil.

4. Cleaning method

Aluminum alloy door and window companies can use a soft cloth dampened with water or neutral and detergent. Do not use ordinary Chinese soap and detergent, and do not want to use detergents with strong acid and alkali such as decontamination powder and toilet detergent.

5. Repair and replacement

The joints of the aluminum alloy frame should be checked frequently, the bolts should be tightened in time, and the damaged parts should be replaced. The vulnerable parts of aluminum alloy doors and windows, such as positioning shaft pins, wind braces, and floor springs, should be checked frequently and lubricated regularly to keep them clean and flexible. The sealing top and the glass glue seal are the key structures to ensure the sealing and heat preservation of aluminum alloy doors and windows. If they fall off, they should be repaired and replaced in time.

6. Regular inspection

Frequent inspections and the joints between the aluminum alloy frame and the wall can easily cause the overall horizontal deformation of the frame structure if it becomes loose over time, making it impossible for aluminum alloy doors and windows companies to close and seal. Therefore, if the screws at our joints are loose, they should be tightened immediately. If the base of the screw is loose, apply a small amount of cement to seal with epoxy super glue.
 
View user's profile Send private message
Display posts from previous:       
Post new topic   Reply to topic

View next topic
View previous topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum


Forums ©